Cycle of education: 2022/2023
The name of the faculty organization unit: The faculty Chemistry
The name of the field of study: Chemical Technology
The area of study: technical sciences
The profile of studing:
The level of study: second degree study
Type of study: full time
discipline specialities : Technology of medicinal products, Chemical analysis in industry and environment , Organic and polymer technology, Polymer materials engineering, Product and ecological process engineering
The degree after graduating from university: Master of Science (MSc)
The name of the module department : Computer Laboratory
The code of the module: 15632
The module status: mandatory for the speciality Product and ecological process engineering
The position in the studies teaching programme: sem: 2 / W15 L30 / 3 ECTS / Z
The language of the lecture: Polish
The name of the coordinator 1: Prof. Mariusz Oleksy, DSc, PhD, Eng.
The name of the coordinator 2: Rafał Oliwa, DSc, PhD, Eng.
The main aim of study: Acquire knowledge about the principles of recycling polymeric waste and solve problems related to their development.
The general information about the module: The student takes a look at a lecture on how to recycle plastic waste, and then learns practical uses in laboratory classes.
1 | Błędzki A. | Recykling tworzyw sztucznych, | WNT, Warszawa. | 1995 |
2 | Florjańczyk Z., Penczek S. | Chemia polimerów (tom III) | Ofic. Wyd. Polt. Warsz., Warszawa. | 1996 |
3 | Normy prawne dotyczące gospodarki odpadami | . |
1 | Kozłowski M. (red.) | Podstawy recyklingu tworzyw sztucznych | Wyd. Polit. Wrocł., Wrocław. | 1998 |
Formal requirements:
Basic requirements in category knowledge:
Basic requirements in category skills:
Basic requirements in category social competences:
MEK | The student who completed the module | Types of classes / teaching methods leading to achieving a given outcome of teaching | Methods of verifying every mentioned outcome of teaching | Relationships with KEK | Relationships with PRK |
---|---|---|---|---|---|
01 |
K_W04+ K_W05+ |
P7S_WG |
|||
02 | Be able to identify the properties of polymeric materials used in technology. |
K_W09++ K_U08+ |
P7S_UW P7S_WG |
||
03 | Be able to classify and select polymeric materials taking into account their application. |
K_U09+ K_U12+ K_K02+ |
P7S_KO P7S_UO P7S_UW |
Attention: Depending on the epidemic situation, verification of the achieved learning outcomes specified in the study program, in particular credits and examinations at the end of specific classes, can be implemented remotely (real-time meetings).
Sem. | TK | The content | realized in | MEK |
---|---|---|---|---|
2 | TK01 | - |
- | MEK01 MEK02 MEK03 |
The type of classes | The work before classes | The participation in classes | The work after classes |
---|---|---|---|
Lecture (sem. 2) | The preparation for a test:
5.00 hours/sem. |
contact hours:
15.00 hours/sem. |
complementing/reading through notes:
1.00 hours/sem. |
Laboratory (sem. 2) | The preparation for a Laboratory:
6.00 hours/sem. The preparation for a test: 12.00 hours/sem. |
contact hours:
30.00 hours/sem. |
Finishing/Making the report:
6.00 hours/sem. |
Advice (sem. 2) | The preparation for Advice:
1.00 hours/sem. |
The participation in Advice:
1.00 hours/sem. |
|
Credit (sem. 2) | The preparation for a Credit:
10.00 hours/sem. |
The written credit:
1.00 hours/sem. |
The type of classes | The way of giving the final grade |
---|---|
Lecture | |
Laboratory | |
The final grade |
Required during the exam/when receiving the credit
(-)
Realized during classes/laboratories/projects
(-)
Others
(-)
Can a student use any teaching aids during the exam/when receiving the credit : no
1 | K. Bulanda; D. Grzęda; M. Oleksy; J. Ryszkowska; G. Węgrzyk | A new method for determining the parameters of mechanical mixing using the example of polyurethane rigid foam synthesis | 2024 |
2 | K. Bulanda; K. Filik; G. Karnas; G. Masłowski; M. Oleksy; R. Oliwa | Samogasnąca kompozycja żywicy epoksydowej o zwiększonym przewodnictwie elektrycznym oraz sposób otrzymywania samogasnącej kompozycji żywicy epoksydowej o zwiększonym przewodnictwie elektrycznym | 2024 |
3 | K. Bulanda; M. Oleksy; R. Oliwa | The Influence of Selected Fillers on the Functional Properties of Polycarbonate Dedicated to 3D Printing Applications | 2024 |
4 | K. Czech; M. Oleksy | Innovative method for studying impact energy absorption of hybrid polymer composites used in the defence industry | 2024 |
5 | O. Markowska; T. Markowski; M. Oleksy | Wiórkownik krążkowy oraz sposób obróbki, zwłaszcza kół zębatych, z wykorzystaniem tego wiórkownika krążkowego | 2024 |
6 | A. Bazan; G. Budzik; J. Cebulski; M. Dębski; T. Dziubek; J. Józwik; A. Kawalec; M. Kiełbicki; Ł. Kochmański; I. Kuric; M. Oleksy; A. Paszkiewicz; P. Poliński; P. Turek | Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process | 2023 |
7 | A. Leśniak; M. Mrówczyńska; M. Oleksy; G. Oleniacz; M. Rymar; I. Skrzypczak | A practical hybrid approach to the problem of surveying a working historical bell considering innovative measurement methods | 2023 |
8 | D. Głowacz-Czerwonka; M. Kuźnia; M. Oleksy; K. Pielichowska; T. Telejko; P. Zakrzewska | The influence of biowaste-based fillers on the mechanical and fire properties of rigid polyurethane foams | 2023 |
9 | K. Balawender; K. Bulanda; K. Kroczek; B. Lewandowski; M. Oleksy; S. Orkisz; M. Potoczek; J. Szczygielski; Ł. Uram | Polylactide-based composites with hydroxyapatite used in rapid prototyping technology with potential for medical applications | 2023 |
10 | K. Balawender; M. Oleksy; A. Pliszka | The Intrapelvic Pressure during Retrograde Intrarenal Surgery in the Setting of Ureteral Access Sheath Size: Experimental Study on 3D Printed Model | 2023 |
11 | K. Bulanda; D. Krajewski; K. Kroczek; M. Oleksy; R. Oliwa | Hybrid polymer composites used in medicine | 2023 |
12 | K. Bulanda; D. Krajewski; K. Kroczek; M. Oleksy; R. Oliwa | Polymer composites used in rapid prototyping technology | 2023 |
13 | K. Bulanda; D. Krajewski; M. Oleksy; R. Oliwa | Epoxy composites with improved flame resistance and electrical conductivity | 2023 |
14 | K. Bulanda; K. Czech; D. Krajewski; K. Kroczek; M. Oleksy; R. Oliwa | Nowoczesne materiały kompozytowe – cz. 1 | 2023 |
15 | K. Bulanda; K. Filik; G. Karnas; G. Masłowski; M. Oleksy; R. Oliwa | Stanowisko probierczo-pomiarowe do badań wysokonapięciowych impedancji, rezystywności i odporności materiałów kompozytowych oraz sposób badania wysokonapięciowych impedancji, rezystywności i odporności materiałów kompozytowych | 2023 |
16 | K. Bulanda; M. Oleksy; R. Oliwa | Polymer Composites Based on Polycarbonate/Acrylonitrile-Butadiene-Styrene Used in Rapid Prototyping Technology | 2023 |
17 | K. Bulanda; T. Markowski; Ł. Molter; M. Oleksy; R. Oliwa | Polymer composites used to manufacturing Naturacustic® acoustic screens | 2023 |
18 | L. Bichajło; R. Oliwa; P. Ostyńska; J. Ryszkowska | Sposób wytwarzania elastycznej pianki poliuretanowej z recyklingu PET | 2023 |
19 | R. Oliwa; A. Pacana; J. Pacana | Possibilities of Using Selected Additive Methods for the Production of Polymer Harmonic Drive Prototypes | 2023 |
20 | G. Budzik; H. Majcherczyk; M. Oleksy; J. Pisula; T. Sanocki; B. Sobolewski; M. Zajdel | Geometrical accuracy of injection-molded composite gears | 2022 |
21 | G. Budzik; J. Cebulski; M. Dębski; T. Dziubek; J. Jóźwik; A. Kawalec; M. Kiełbicki; Ł. Kochmański; I. Kuric; M. Oleksy; A. Paszkiewicz; P. Poliński; P. Turek | Strength of threaded connections additively produced from polymeric materials | 2022 |
22 | G. Budzik; K. Bulanda; D. Filip; J. Jabłoński; A. Łazorko; M. Oleksy; A. Paszkiewicz; Ł. Przeszłowski; J. Sęp; S. Snela; P. Turek; S. Wolski | Manufacturing Polymer Model of Anatomical Structures with Increased Accuracy Using CAx and AM Systems for Planning Orthopedic Procedures | 2022 |
23 | G. Budzik; L. Nędza; M. Oleksy; J. Oliwa; R. Oliwa | Sposób modyfikacji bentonitu | 2022 |
24 | G. Budzik; M. Oleksy; R. Oliwa; A. Paszkiewicz; Ł. Przeszłowski; B. Sobolewski; M. Wieczorowski; J. Woźniak | The Place of 3D Printing in the Manufacturing and Operational Process Based on the Industry 4.0 Structure | 2022 |
25 | K. Balawender; R. Brodowski; G. Budzik; J. Cebulski; D. Filip; K. Kroczek; B. Lewandowski; A. Mazur; D. Mazur; M. Oleksy; S. Orkisz; Ł. Przeszłowski; J. Szczygielski; P. Turek | Characterisation of Selected Materials in Medical Applications | 2022 |
26 | K. Bulanda; K. Czech; D. Krajewski; G. Masłowski; D. Mazur; M. Oleksy; R. Oliwa | Methods for Enhancing the Electrical Properties of Epoxy Matrix Composites | 2022 |
27 | K. Bulanda; K. Czech; D. Krajewski; M. Oleksy; R. Oliwa | Modyfikacja osnowy i wzmocnienia przekładkowych kompozytów polimerowych stosowanych w przemyśle zbrojeniowym | 2022 |
28 | K. Bulanda; K. Filik; G. Karnas; J. Królczyk; G. Masłowski; M. Oleksy; R. Oliwa | A new method to electrical parameters identification of carbon fiber reinforced composites using lightning disturbances corresponding to subsequent return strokes | 2022 |
29 | K. Bulanda; M. Oleksy; R. Oliwa | Hybrid Polymer Composites Based on Polystyrene (PS) Used in the Melted and Extruded Manufacturing Technology | 2022 |
30 | K. Bulanda; M. Oleksy; R. Oliwa | Polymer Composites Based on Glycol-Modified Poly(Ethylene Terephthalate) Applied to Additive Manufacturing Using Melted and Extruded Manufacturing Technology | 2022 |
31 | K. Czech; A. Domańska; M. Oleksy; R. Oliwa | Hybrid polymer composites with enhanced energy absorption | 2022 |
32 | R. Oliwa | Funkcjonalne kompozyty epoksydowe wzmocnione włóknami | 2022 |
33 | A. Kalina; A. Mazurkow; M. Oleksy; B. Wierzba; W. Witkowski | Properties of Elasto-Hydrodynamic Oil Film in Meshing of Harmonic Drive Gears | 2021 |
34 | A. Kalina; A. Mazurkow; M. Oleksy; B. Wierzba; W. Witkowski | The effect of oil feeding type and oil grade on the oil film bearing capacity | 2021 |
35 | G. Budzik; J. Mirowski; M. Oleksy; R. Oliwa; J. Ryszkowska; J. Tomaszewska | Poly(vinyl chloride) Composites with Raspberry Pomace Filler | 2021 |
36 | G. Budzik; K. Bulanda; J. Fal; T. Jesionowski; M. Oleksy; R. Oliwa; Ł. Przeszłowski | Polymer Composites Based on Polycarbonate (PC) Applied to Additive Manufacturing Using Melted and Extruded Manufacturing (MEM) Technology | 2021 |
37 | G. Budzik; K. Bulanda; K. Czech; D. Krajewski; A. Mazurkow; M. Oleksy; R. Oliwa | Hybrid Polymer Composites Used in the Arms Industry: A Review | 2021 |
38 | G. Budzik; K. Bulanda; K. Czech; D. Krajewski; M. Oleksy; R. Oliwa; Ł. Przeszłowski | Właściwości użytkowe kompozytów polimerowych stosowanych w technologii szybkiego prototypowania | 2021 |
39 | G. Budzik; K. Bulanda; M. Magniszewski; M. Oleksy; R. Oliwa; A. Paszkiewicz; Ł. Przeszłowski | Torsional strength tests of spline connections made of polymer materials (Rapid communication) | 2021 |
40 | G. Budzik; M. Heneczkowski; T. Jesionowski; M. Oleksy; R. Oliwa; R. Pietryka; W. Pietryka; W. Pietryka | Hybrydowe kompozycje poliestrowych farb proszkowych | 2021 |
41 | G. Budzik; O. Markowska; M. Oleksy; R. Oliwa; P. Ostyńska; T. Żółkoś | Sposób otrzymywania kompozycji na osnowie polipropylenu z dodatkiem recyklatu MDF | 2021 |
42 | J. Mirowski; K. Mizera; M. Oleksy; R. Oliwa; E. Rój; J. Ryszkowska; J. Tomaszewska | Composites of Poly(vinyl chloride) with Residual Hops after Supercritical Extraction in CO2 | 2021 |
43 | K. Bulanda; K. Czech; D. Krajewski; M. Oleksy; R. Oliwa | Wpływ modyfikacji materiału osnowy stosowanej do wyrobu kompozytów polimerowych na jej przewodnictwo elektryczne oraz wybrane właściwości mechaniczne | 2021 |
44 | K. Bulanda; K. Filik; G. Karnas; G. Masłowski; M. Oleksy; R. Oliwa | Testing of Conductive Carbon Fiber Reinforced Polymer Composites Using Current Impulses Simulating Lightning Effects | 2021 |
45 | M. Auguścik-Królikowska; J. Bartoń; G. Budzik; M. Gzik ; M. Oleksy; R. Oliwa; J. Ryszkowska | Effects of Various Types of Expandable Graphite and Blackcurrant Pomace on the Properties of Viscoelastic Polyurethane Foams | 2021 |
46 | R. Oliwa | Ognioodporne kompozyty polimerowowłókniste stosowane w kolejnictwie | 2021 |
47 | S. Boncel; K. Bulanda; J. Fal; M. Liu; M. Oleksy; J. Shi; J. Sobczak; G. Żyła | High AC and DC Electroconductivity of Scalable and Economic Graphite–Diamond Polylactide Nanocomposites | 2021 |
48 | A. Ambroziak; M. Auguścik-Królikowska; M. Oleksy; R. Oliwa; J. Ryszkowska; L. Szczepkowski | The structure and properties of viscoelastic polyurethane foams with fillers from coffee grounds | 2020 |
49 | G. Budzik; H. Majcherczyk; M. Oleksy; R. Oliwa; M. Sobczyk; M. Strącel | Polymers in gearbox production | 2020 |
50 | G. Budzik; J. Jóźwik; M. Oleksy; A. Paszkiewicz; P. Turek; J. Woźniak; D. Żelechowski | Analysis of Wear of the Polymer Mold in the Production of Wax Casting Models of Aircraft Engine Blades | 2020 |
51 | G. Budzik; J. Jóźwik; Ł. Kochmański; M. Oleksy; A. Paszkiewicz; Ł. Przeszłowski; J. Sęp; P. Turek; D. Żelechowski | An Analysis of the Casting Polymer Mold Wear Manufactured Using PolyJet Method Based on the Measurement of the Surface Topography | 2020 |
52 | G. Budzik; K. Bulanda; A. Mazurkow; M. Oleksy; R. Oliwa; Ł. Przeszłowski | Biodegradable polymer composites used in rapid prototyping technology by Melt Extrusion Polymers (MEP) | 2020 |
53 | G. Budzik; K. Bulanda; J. Fal; K. Grąz; R. Kuzioła; M. Oleksy; J. Sobczak; J. Traciak; G. Żyła | Electrical and Optical Properties of Silicon Oxide Lignin Polylactide (SiO2-L-PLA) | 2020 |
54 | G. Budzik; K. Bulanda; M. Gontarz; M. Oleksy; R. Oliwa | Biodegradable polymer composites based on polylactide used in selected 3D technologies | 2020 |
55 | G. Budzik; K. Bulanda; M. Oleksy; P. Turek | Polymer materials used in medicine processed by additive techniques | 2020 |
56 | G. Budzik; K. Bulanda; M. Oleksy; R. Oliwa; I. Skrzypczak; R. Szałajko | Phenol-formaldehyde resin composites filled with modified phlogopite reinforced with hybrid glass and basalt fiber meshes used as grinding wheels | 2020 |
57 | G. Budzik; K. Bulanda; S. Krauze; M. Oleksy; R. Oliwa | Analysis of mechanical properties and distribution of deformation during the shear of polymer-fiber composites containing flame retardants | 2020 |
58 | G. Budzik; K. Bulanda; S. Krauze; M. Oleksy; R. Oliwa; P. Ostyńska; M. Płocińska | Fire resistance and mechanical properties of powder-epoxy composites reinforced with recycled glass fiber laminate | 2020 |
59 | G. Budzik; K. Bulanda; T. Markowski; M. Oleksy; R. Oliwa | Polymer Composites Used in Rapid Prototyping Technology | 2020 |
60 | G. Budzik; T. Dziubek; T. Markowski; M. Oleksy | Place of Designing and Machine Construction Basics in Industry 4.0 Structure | 2020 |
61 | K. Bulanda; M. Cieplak; M. Oleksy; P. Połowniak; M. Sobolak | Application of polymeric materials for obtaining gears with involute and sinusoidal profile | 2020 |
62 | K. Dudek; L. Gałda; R. Oliwa; J. Sęp | Surface layer analysis of helical grooved journal bearings after abrasive tests | 2020 |
63 | M. Bolanowski; G. Budzik; M. Oleksy; A. Paszkiewicz; T. Pisz; Ł. Przeszłowski; P. Sowa | Remote Design and Manufacture through the Example of a Ventilator | 2020 |
64 | M. Bolanowski; G. Budzik; M. Oleksy; A. Paszkiewicz; Ł. Przeszłowski | Process of Creating an Integrated Design and Manufacturing Environment as Part of the Structure of Industry 4.0 | 2020 |
65 | R. Oliwa | Compositions of unsaturated polyester resins used for facing layers of laminates | 2020 |
66 | R. Oliwa | Epoxy resin compositions containing liquid phosphorus flame retardants used in infusion technology | 2020 |
67 | R. Oliwa | The Mechanical Properties of Kevlar Fabric/Epoxy Composites Containing Aluminosilicates Modified with Quaternary Ammonium and Phosphonium Salts | 2020 |
68 | Ł. Byczyński; Z. Florjańczyk; M. Heneczkowski; R. Oliwa; B. Pilch-Pitera; A. Plichta; G. Rokicki; J. Wadas | Synthesis and characterization of one-component, moisture curing polyurethane adhesive based on Rokopol D2002 | 2020 |
69 | A. Białek; G. Budzik; M. Oleksy; B. Sarna | Kompozycja do otrzymywania biodegradowalnej taśmy spieniającej | 2019 |
70 | E. Chmiel; J. Lubczak; R. Oliwa | Boron-containing non-flammable polyurethane foams | 2019 |
71 | G. Budzik; J. Fal; M. Oleksy; M. Wanic; G. Żyła | Electrical Conductivity and Dielectric Properties of Ethylene Glycol-Based Nanofluids Containing Silicon Oxide–Lignin Hybrid Particles | 2019 |
72 | G. Budzik; K. Bulanda; M. Nędza; M. Oleksy; J. Oliwa; R. Oliwa | The use of a mixer with built-in Parshall’s venturi for modification of bentonite designed for the filling of polymer resins | 2019 |
73 | G. Budzik; K. Bulanda; M. Oleksy; J. Oliwa; R. Oliwa | Effect of modified bentonites on the crosslinking process of epoxy resin with alifphatic amine as curing agent | 2019 |
74 | G. Budzik; L. Nędza; M. Oleksy; J. Oliwa; R. Oliwa | Sposób modyfikacji bentonitu | 2019 |
75 | G. Budzik; M. Heneczkowski; M. Oleksy; A. Szeliga; S. Szeliga | Wielowarstwowa folia typu stretch | 2019 |
76 | H. Galina; M. Heneczkowski; M. Oleksy; J. Oliwa; R. Oliwa; P. Szałański | A method of modification of bentonite and a method of the application | 2019 |
77 | J. Czech-Polak; M. Heneczkowski; M. Oleksy; R. Oliwa | Elastyczna pianka poliuretanowa o ograniczonej palności i sposób jej wytwarzania | 2019 |
78 | J. Czech-Polak; M. Kowalski; S. Krauze; M. Oleksy; R. Oliwa; M. Płocińska | Powder-epoxy resin/glass fabric composites with reduced flammability | 2019 |
79 | J. Fal; M. Malicka; M. Oleksy; M. Wanic; G. Żyła | Experimental Investigation of Electrical Conductivity of Ethylene Glycol Containing Indium Oxide Nanoparticles | 2019 |
80 | M. Bolanowski; G. Budzik; D. Mazur; M. Oleksy; A. Paszkiewicz | Analysis of possible SDN use in the rapid prototyping process as part of the Industry 4.0 | 2019 |
81 | M. Bolanowski; G. Budzik; M. Oleksy; A. Paszkiewicz | Przemysł 4.0 cz. II. Uwarunkowania w obszarze technologii wytwarzania i architektury systemu informatycznego w przetwórstwie tworzyw polimerowych | 2019 |
82 | M. Kowalski; S. Krauze; M. Oleksy; J. Oliwa; R. Oliwa; A. Węgier | Fire resistant glass fabric-epoxy composites with reduced smoke emission | 2019 |
83 | M. Oleksy | Materiały polimerowe stosowane na elementy maszyn | 2019 |
84 | R. Oliwa; J. Pacana | Use of rapid prototyping technology in complex plastic structures Part I. Bench testing and numerical calculations of deformations in harmonic drive made from ABS copolymer | 2019 |
85 | R. Oliwa; J. Pacana | Use of rapid prototyping technology in complex plastic structures. Part II. Impact of operating conditions on functional properties of polymer harmonic drives | 2019 |
86 | S. Krzemińska; L. Lipińska; M. Oleksy; W. Rzymski; A. Smejda-Krzewicka; M. Woluntarski | Kompozycja elastomerowa z karboksylowanego kauczuku butadienowo-akrylonitrylowego | 2019 |